ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

FAILURE TO BOOT

 
Ayman Altounji
Valued Contributor

FAILURE TO BOOT

WHEN I TURN ON THIS SERVER IT HAS TWO LONG BEEPS FOLLOWED BY TWO SHORT BEEPS, IT THEN TURNS ITSELF OFF AND THEN ON.
I HAVE CHECKED THE MEMORY, PROCESSOR AND SCSI CONTROLLER.

ANY IDEA?
1 REPLY
Ayman Altounji
Valued Contributor

Re: FAILURE TO BOOT

Analyst,
I believe you will find a fan not spinning. If all fans are spinning, then the processor fan sensing lead is not working or it may be spinning slow. Replace the processor fan.
Mark