FLASHIN LED'S ON ML 350 G6 SYSTEM BOARD

COSMIN NICOARA · ‎04-19-2010

HELLO ,

I HAVE A ML 350 G6 WITH 2 460 W PS , 2 5506 CPU AND 12 GB RAM .
IT NOT BOOT ANY MORE , ONLY THE FANS START IN HIGH SPEED .BEFOR STRTING ON THE SERVER ALL THE LEDS FRO CR1 TO CR8 STAYS ON AND GREEN .
NO INFORMATION REGARDING THIS ON MANUAL .
AFTER POWER ON CR7 REMAIN ON CR12 ON AN CR1 BLINK FROM ABOUT EVERY 12 SECONDS. ALL FANS RUNING ION HIGH SPEED .

PLEASE HELP

Erdogan Temur · ‎04-19-2010

Hi,

Here is the advisory for this issue:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01994530〈=en&cc=us&taskId=101&prodSeriesId=3890172&prodTypeId=15351

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Regards.

Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.