HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Failed Drive replacement not taking

 
dasgoot
Occasional Visitor

Failed Drive replacement not taking

Our db server has a logical raid 1 drive. One of the drives failed. I have tried four different replacement drives and they all fail. Its giving me a drive mix 0x25 error for the reason it failed. they are both sata 500gb drives.

Its an HP dl380 g6, I am using smart array config. Two of the drives I tried were same everything (firmware, brand, speed, type, etc.). still failed. the other three were different brands

Any advice here would be much appreciated.

1 REPLY
Jimmy Vance
HPE Pro

Re: Failed Drive replacement not taking

My first suggestion would be to run an Array Diagnostics report




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!