Community
ProLiant Servers (ML,DL,SL)
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Failed hdd in RAID 1 problem (my scenario)

 
Karabagh_
Occasional Contributor

‎10-21-2018 01:44 AM - edited ‎10-21-2018 02:03 AM

‎10-21-2018 01:44 AM - edited ‎10-21-2018 02:03 AM

Failed hdd in RAID 1 problem (my scenario)

Hello Dears. I write to you from Azerbaijan. I have 2 x HP proliant DL380 G7 server. One of servers have failed hdd into RAID 1 group. You know yellow amber blinking.  I have bought new SAS drive. I changed failed with new one after shutdown server. But nothing is going on.  System is not boot ESXI. And rebuilding process is not going. Please help me. How can I replace disk and start rebuild process normally with new disk.??? I searched on Internet but can not find normal answer for RAID 1.

0 Kudos
Reply
1 REPLY 1
Cali
Honored Contributor

‎10-22-2018 02:10 AM - edited ‎10-22-2018 02:11 AM

‎10-22-2018 02:10 AM - edited ‎10-22-2018 02:11 AM

Re: Failed hdd in RAID 1 problem (my scenario)

If you have a Disk Drive failure:

Keep the Server running, pull the failed Drive, insert the new one.

Then the rebuild start automatic (The Geeen LED is blinkting static).

In your Case you can try this:

Remove the new Drive and boot the Server with only the good one.

If the Server ist online, put the new Drive in.


======================
That was not planned in this way.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.