ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Failed hdd in RAID 1 problem (my scenario)

 
Karabagh_
Occasional Contributor

Failed hdd in RAID 1 problem (my scenario)

Hello Dears. I write to you from Azerbaijan. I have 2 x HP proliant DL380 G7 server. One of servers have failed hdd into RAID 1 group. You know yellow amber blinking.  I have bought new SAS drive. I changed failed with new one after shutdown server. But nothing is going on.  System is not boot ESXI. And rebuilding process is not going. Please help me. How can I replace disk and start rebuild process normally with new disk.??? I searched on Internet but can not find normal answer for RAID 1.

1 REPLY 1
Cali
Honored Contributor

Re: Failed hdd in RAID 1 problem (my scenario)

If you have a Disk Drive failure:

Keep the Server running, pull the failed Drive, insert the new one.

Then the rebuild start automatic (The Geeen LED is blinkting static).

In your Case you can try this:

Remove the new Drive and boot the Server with only the good one.

If the Server ist online, put the new Drive in.


======================
That was not planned in this way.