ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Failed to boot from SAN (BL460c with EVA4000)

Occasional Visitor

Failed to boot from SAN (BL460c with EVA4000)

Dear Sirs,

We use this application notes as the guide but still have a problem as described below. Please help us. Thank you very much.

I have problem about Boot from SAN solution of HP blade server.

I can install OS system on Blade server with Disk in SAN by install driver using F6 (install diskette) method.

*** But after installation, when we reboot the windows server. It keeps on rebooting every time. ***

I have setup Bios F9 = Disable smart array E200i, Boot order, IPL

Ctrl-Q for configure LUN for boot primary following Document Boot from SAN in HP blade server already.

EVA4000 have present LUN (40GB) of SAN to each server already.

HP blade server BL460c 12 units

Connects to HP EVA4000 1 unit

By connects by HP SAN Switch 4/24 1 unit.

OS for install blade server Window 2003 Service pack 1
Occasional Advisor

Re: Failed to boot from SAN (BL460c with EVA4000)


I have the same problem, someone as an idee ?