ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Fan 3 and Fan 4 Failure at ML370 G3

Emad Omar
Regular Advisor

Fan 3 and Fan 4 Failure at ML370 G3

I have a failure at Fans 3 & 4 of HP Proliant Server ML370/G3. When I replaced both of them I got the same problem.
Can anybody help to fix this problem. I upgraded the Bios Firmware but still get the same.Is this refer to mainboard failure or the power supply???!!!!
1 REPLY
JohnWRuffo
Honored Contributor

Re: Fan 3 and Fan 4 Failure at ML370 G3

Make sure the fans are firmly seated in the fan cage. If they are both seated well and you get no LED's indicating power is applied, then the main board is likely defective. You should have warranty left on this server:
http://www2.itrc.hp.com/service/ewarranty/warrantyInput.do
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt