HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Fault Tolerance on DL380 G4

 
GHE
Occasional Visitor

Fault Tolerance on DL380 G4

Can any one tell me if the Proliant DL380 G4 memory and processors can be run in lockstep mode to give a fully Fault Tolerant solution.
2 REPLIES
Mike Bollman_1
Respected Contributor

Re: Fault Tolerance on DL380 G4

It sounds like you are looking for something like a stratus box. From the factory the ProLiant cannot do this and as far as I know there is no aftermarket solution for this(on proliants). They do have a cluster in a box solution, but this is not lockstep by any means.
Prashant (I am Back)
Honored Contributor

Re: Fault Tolerance on DL380 G4

Hi,

You can use options like online spare memory in DL 380 G4 server. Refer to specs for the server for more details.

http://h10010.www1.hp.com/wwpc/us/en/ss/WF05a/15351-241434-241475-241475-f79-397634.html

But for processor we dont have fault tolerance. For power supply yes we have.

Regards
Prashant S.
Nothing is impossible