HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Fiber channel interfeace storage Installation

 
cpradip1069
Advisor

Fiber channel interfeace storage Installation

Hi,
i dont know how install & configure fiber channel interfeace storage on server. If any one have step-by-step installation procedure or any information, Please sent me.

Thanks & Regard,
Pradeep
5 REPLIES
Torsten.
Acclaimed Contributor

Re: Fiber channel interfeace storage Installation

Without knowledge about what hardware and OS you have, I can only give a general advise. Put a supported HBA in a supported slot and install the driver. Create a zoning on the switch and present the storage from the storage device.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
asqwq
Regular Advisor

Re: Fiber channel interfeace storage Installation

hi
what is your server and os ?
please say to me and after that i advise you step-by-step
best regards
cpradip1069
Advisor

Re: Fiber channel interfeace storage Installation

hi asqwq ,

Sorry for late reply, I am using windows 2003 enterprise server edition & HP DL 380 G4 Server.

Thanks & Regard,
Pradeep
asqwq
Regular Advisor

Re: Fiber channel interfeace storage Installation

hi
thanks for information
you should install hba in riser of server after that you should download driver of hba
for windows 2003 .what is model or part number of your hba ?
best regards
asqwq
Regular Advisor

Re: Fiber channel interfeace storage Installation

hi
if you dont have information about riser you can use manual of server in bulletin or hp website
best regards