HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Fibre HBA requirements for DL 585 under RHEL AP

 
SOLVED
Go to solution
SYED SHAJEE WADOOD
Frequent Advisor

Fibre HBA requirements for DL 585 under RHEL AP

A customer wants to connect the following

1. Sun Storage 6140 X 1
2. Sun Storage 3510 X 2
3. HP EVA 6100 x 1

Obviously wants to present storage from these disk arrays.

available slots for PCI e HBA is 6.
will use 1 x HP StorageWorks FCA2214DC for connecting it to EVA.

what other controllers should be required. or we can use HP StorageWorks FCA2214DC to connect with Sun Storage as well.

help is greatly appreciated.

regards,

Shajee Wadood

what would be the required HBAs for Sun Storage.
4 REPLIES
Johan Guldmyr
Honored Contributor

Re: Fibre HBA requirements for DL 585 under RHEL AP

Hi, unsure.. but shouldn't you check what FC HBA requirements Sun has for their arrays?
Johan Guldmyr
Honored Contributor

Re: Fibre HBA requirements for DL 585 under RHEL AP

By the way, HP connectivity compatibility can be found on HP SPOCK. http://h20272.www2.hp.com
Andrew Gladstone
Valued Contributor
Solution

Re: Fibre HBA requirements for DL 585 under RHEL AP

Shajee-
The FCA2214DC is inter-operable with the SUN 3510 and 6140. They are marketed by SUN under the following part numbers - SG-XPCI2FC-QF4, 375-3294. This adapter is the same as the HP FCA2214DC (321835-B21).
SYED SHAJEE WADOOD
Frequent Advisor

Re: Fibre HBA requirements for DL 585 under RHEL AP

Thanx Johan and Andrew for the help.