ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

[Firmware Bug]: the BIOS has corrupted

 
Scr33nN4m3
Occasional Visitor

[Firmware Bug]: the BIOS has corrupted

Hi to all.

This error comes up booting to a fresh install Debian (HP DL160se  G6) (se316m1)

[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)

alg: rsa: test failed on vector 4, err=-74

ERST: failed to get Error Log Address Range.

Failed to find cpu0 device node

Can I safely ignoring this error?  I have set "Processor Power and Utilization Monitoring" EV to Disabled, but it doesn't resolve problem.

Is BIOS R02 05/15/2010 latest? I try re-flash BIOS by other ROMPaq, but they are not suitable.

Sorry for my English.

1 REPLY 1
Jimmy Vance
HPE Pro

Re: [Firmware Bug]: the BIOS has corrupted

[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)

Can safely be ignored. This is a kernel message checking to see if all the general purpose performance counters are available for the OS to use. ProLiant ROM reserves some of the performance counters for harware monitoring and control.

No support by private messages. Please ask the forum! Accept or KudoI work for HPE