HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware CD 8.30-0 Issue

 
goldeng
Frequent Advisor

Firmware CD 8.30-0 Issue

I have downloaded the firmware .iso file and extracted it to a DVD.

How the do you access the DVD offline to install the firmware.

The server is ML350 G5 and we are getting the BSOD stop error: 0x000000D1. After researching the problem we came have come to the conclusion that its linked to http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01068337&dimid and the array controller.

Unfortantly we dont have any OS installed on it as this is a brand new server and we cannot get past this BSOD.

Cheers J
6 REPLIES
Ken Henault
Honored Contributor

Re: Firmware CD 8.30-0 Issue

The firmware CD is bootable. Just boot it, and follow the onscreen prompts.
Ken Henault
Infrastructure Architect
HP
goldeng
Frequent Advisor

Re: Firmware CD 8.30-0 Issue

Tried doing that and it did not boot
KarloChacon
Honored Contributor

Re: Firmware CD 8.30-0 Issue

try using a CD not a DVD
Didn't your momma teach you to say thanks!
goldeng
Frequent Advisor

Re: Firmware CD 8.30-0 Issue

Also tired making it just a CDROM and that did not work.
Cederberg
Honored Contributor

Re: Firmware CD 8.30-0 Issue

What do you mean with extracted it to DVD.

You need to burn the iso file to a CD with burning app. that supports "write image to CD" for example imgburn that is a free applikation. Then it will be bootable..
goldeng
Frequent Advisor

Re: Firmware CD 8.30-0 Issue

cheers everyone