ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware CD for ML350 G1

Matt McElreath
Occasional Advisor

Firmware CD for ML350 G1

I would like to updtate the firmware and Bios for an old G1 ML350. I tried the ISO at the following link http://h18023.www1.hp.com/support/files/server/us/download/24777.html (v7.50) but when I try to boot from it, it says that the server is not supported by the CD.

Is there some other download I can use for this?
6 REPLIES
TarunJain
Respected Contributor

Re: Firmware CD for ML350 G1

Hi Matt Please check the following link for supported CD :
http://h18007.www1.hp.com/support/files/server/us/locate/20_1120.html
KarloChacon
Honored Contributor

Re: Firmware CD for ML350 G1

just in case test 7.4 version or older

http://h18007.www1.hp.com/support/files/server/us/download/23331.html

regards
Didn't your momma teach you to say thanks!
TarunJain
Respected Contributor

Re: Firmware CD for ML350 G1

Hi Matt,

Please make sure, the server is free from any unsupported components.
Checked & found that the FMCD 7.5 contains the Online & offline firmware update for this server.
Page 5 of following Document :
http://h18023.www1.hp.com/support/files/server/us/WebDoc/firmware/firmware750content.pdf

Have u tried online update ?
If not then please check it up.
Frank Bulk
Occasional Visitor

Re: Firmware CD for ML350 G1

Matt's right, the 7.50 CD doesn't work on the ML350 (I have a 1 GHz, D04/P04).

I'm downloading the 7.20 now to see if that works.

Frank
Ryan Goff
Valued Contributor

Re: Firmware CD for ML350 G1

You can find the Firmware CD Support matrix here:

http://h18004.www1.hp.com/support/files/server/us/cd_supportinfo/cd_supportinfo.html

It states that you can use version version 7.0 through 7.5
Frank Bulk
Occasional Visitor

Re: Firmware CD for ML350 G1

I don't really care what the matrix says, v7.50 doesn't work on an ML350 G1, and two people have tried and proven that.

I d/l v7.20, burned it to a CD, and it loads.

Frank