ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware Online Flash for QLogic Fibre Channel HBA cp019064.exe does not work

ITPlatform
Occasional Visitor

Firmware Online Flash for QLogic Fibre Channel HBA cp019064.exe does not work

The cp019064 installs correctly on BL465 G7 according to logfile C:\cpqsystem\hp\log\localhost\hpsum.log

The firmware on the Qlogic HBA does not get updated.

 

Expected firmware and BIOS versions in cp019064 according to reelase notes:

  • Firmware 6.02.00
  • BIOS 3.18
  • Firmware and BIOS on my G7 server after "succesfull" installation of cp019064:
    • Firmware 5.06.05
    • BIOS 3.13

Prior to the firmware update I have installed PSP 9.10 and cp017949.exe which is a prereq.

 

Why is the firmware not updated?

 

 

 

P.S.This thread has been moved from  Servers>General to ProLiant Servers (ML,DL,SL)-HP Forums Moderator

3 REPLIES
xmate
Valued Contributor

Re: Firmware Online Flash for QLogic Fibre Channel HBA cp019064.exe does not work

Some firmware updates may require server reboot to finish the update process. Did you reboot the server?
Was the post useful? Click on the white KUDOS! Star.
Ali
HPE Pro

Re: Firmware Online Flash for QLogic Fibre Channel HBA cp019064.exe does not work

Hi,

 

cp019064.exe has been included in SPP.

 

HP Service Pack for ProLiant version 2013.02.0 Contents:

http://ftp.hp.com/pub/softlib2/software1/doc/p1822529277/v85395/SPP2013.02.0-ContentsReport.pdf

 

You may update the system using the latest SPP

http://h18004.www1.hp.com/products/servers/management/spp/index.html

 

hope this helps,

 

how to say thanks.... click on Star Kudos!

 

Cheers!

Aftab

I work for HPE
Looking for a quick resolution to a technical issue for your HPE products? HPE Support Center Knowledge-base – Just a Click Away!
See Self Help Post for more details
ITPlatform
Occasional Visitor

Re: Firmware Online Flash for QLogic Fibre Channel HBA cp019064.exe does not work

Hi

 

The BIOS and firmware did not change after a reboot.

Since there are no other prereq than cp017949.exe (witch is installed) I see no need to update to a newer SPP.

 

Any other suggestions?

 

Regards

Jesper