ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware version

 
rishi1985
Occasional Contributor

Firmware version

Hi all,

I m a Newbie to this Community. I m facing an issue with Proliant DL 380 Gen10 server. I am not able to understand that to 10gb  2- port SFP+ adapter, which Latest firmware is Recommended by HPE Product team.

I wanted to know the answer of this question, Because some people says recommended firmware version is 10.4.3 and some says the version should be 10.3.5

So m not able to understand.  Plz. guide me in this issue.

Thnx nd regards

Rishi katoch

 

1 REPLY 1
parnassus
Honored Contributor

Re: Firmware version

Difficult to tell you if you forget to provide the SKU of the network interface card you're planning to upgrade.

As reference, HPE ProLiant DL380 Gen10 Server supports Ethernet NICs listed in its QuickSpecs document.

Once you will identify the specific NIC you're referring to  then it will be possible to verify which is the proper suggested Firmware (and Device Drivers, those OS dependant) to use.

Kind regards.