ProLiant Servers (ML,DL,SL)

Flashing Error on dl380

 
YakutCompany
New Member

Flashing Error on dl380

When I’m trying to access intelligent provisioning (HP Gen 9 dl380 ) using F10 it didn’t appears. Instead accessing to intelligent provisioning

I tried to reinstall the intelligent provisioning using burned disk. After boot server using intelligent provisioning disk it trying to reinstall but after few seconds it shows “Error flashing the NVRAM”

Massage and restart the server.

Resetting NVRAM using ROM-Based Setup Utility and System Maintenance Switch didn’t worked.

Still appears the same error.

How can I solve this problem?

 

3 REPLIES 3
Suman_1978
HPE Pro

Re: Flashing Error on dl380

Hi,

A similar issue was discussed here in this post.

See if your server BIOS and iLO requires an update, may be Intelligent Provisioning needs a compatible/latest firmware on iLO and BIOS.

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_f8b12eb6ec8b45cab4c628249a
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_52af23767d5d4a06a1528bce24
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_2a4f6e276e9d4eac9d3716e50b

Thank You!
https://support.hpe.com/hpesc/public/home


I work for HPE

Accept or Kudo

AxeLinux
Regular Visitor

Re: Flashing Error on dl380

Hi YakutCompany. 

Follow these steps

  1. Download the latest version of SPP
  2. Creat USB boot bootable with HPE USB Key Utility with the SPP ISO
  3. Boot the server on your USB
  4. Follow the steps
  5. Download Intelligent Provioning 3.62 : https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_c0a417ecd8ff486c8be8ef3f06&swEnvOid=2000152#tab2
  6. Creat USB boot bootable with HPE USB Key Utility with the Intelligent Provioning 3.62
  7. Boot the server on your USB

Tell me if the problem still persists

AmRa
HPE Pro

Re: Flashing Error on dl380

Refer the below customer advisory and check by NAND format

 

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04996097

I am an HPE Employee

Accept or Kudo