FlexBoot - Mellanox

[MichaelEaton]

Hi Guys,

I’m trying to get into the FlexBoot configuration menu of my Mellanox FlexLom card. It should present itself as a boot device or give me the option in the boot menu or allow me to press CTRL+B but neither way seems to work.

I’ve tried UEFI Bios/Legacy Bios and turning Secure Boot on and off.

I have the 640FLR-28SFP card and version 3.5.701 of FlexBoot. I’ve ran the latest SPP and so all firmware is current.

This is a DL360 Gen10 box. Any ideas?

[AdvanceResExp]

Hello Michael,

Please refer to the below Gen10 deployment guide page 13 onwards and let me know if that helps.

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00016376en_us

[Emraansy]

Hello Michael, Please refer to the below Gen10 deployment guide page 13 onwards and let me know if that helps. https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00016376en_us