HPE Community
ProLiant Servers (ML,DL,SL)
1753620 Members
6480 Online
108797 Solutions
New Discussion юеВ

Re: Floppy boot array configuration

 
SOLVED
Go to solution
Vijay_44
Honored Contributor

тАО01-15-2005 01:50 AM

тАО01-15-2005 01:50 AM

Re: Floppy boot array configuration

The 1729 is a normal message when you create a raid with parity (4 and 5) and it should not prevent you from loading the OS or using the system.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EX981005_CW01
ThereтАЩs your problem!!! This thing is set to EVIL!
0 Kudos
Reply
Wholsea
Occasional Advisor

тАО01-15-2005 02:38 AM

тАО01-15-2005 02:38 AM

Re: Floppy boot array configuration

Oh, Duh. Stupid dual power supplies...

Problem solved, System is rolling.

You guys rawk.
0 Kudos
Reply
K F_1
New Member

тАО06-29-2005 02:23 AM

тАО06-29-2005 02:23 AM

Re: Floppy boot array configuration

hey, how's it goin?
I have a 1600 that has 1 dead drive and it won't boot. I have downloaded every tool I can find from hp's site.
It was a raid 5 with 3 drives, so 2 should still be good.
any ideas and how about that old skool boot disk you have?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.