ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

G1 to G2 and port scsi

Tonus
Occasional Visitor

G1 to G2 and port scsi

I use DL380 G1 server. I uses the port 1 scsi on this server.(with raid1)
I migrate many server on DL380 G2 and G3.(move 1 of the 2 disk of G1 and install new drivers)

On the G3, it's work because i can use a cable to choose the port scsi 1 in internal.(the default port is 2)
But with the G2 the default port is 2 and i don't see a internal scsi port1.

Can i use a program to change the port scsi use by the disk installed from G1 to G2 ?
Maybe there is a scsi port 1 hide to the motherboard ?
2 REPLIES
Sunil Jerath
Honored Contributor

Re: G1 to G2 and port scsi

Hello Tonus,
Have a look at the SCSI Port settings by going in BIOS/System partition.

Regards,
Tonus
Occasional Visitor

Re: G1 to G2 and port scsi

I can't change the setting. The scsi
paramaters of the disk are port 1: id 0
(F8) for access to BIOS/System partition.

When i use this disk on G2 the internal scsi
card use port 2. The disk boot but i want i add a disk for the mirroir(raid 1) on the port1:id 1...