ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

G3 DL380 - motherboard LEDs

David Hayes_4
Occasional Contributor

G3 DL380 - motherboard LEDs

Can anyone point me to some documentation that explains what the different motherboard LEDs signify on a Proliant DL380?

Background: I've got a 2-CPU G3 DL380 running RedHat ES 3.0, booting off an MSA1000 via a Qlogic Fibrechannel card. For the last three weeks or so, it's been crashing every ~48 hours or so. When it's on, the CR47 & CR48 LEDs on the motherboard are flashing amber, and the CR59, CR66 & CR67 LEDs are Solid Amber. I assume these LEDs are trying to tell me something, but I don't know what.

Thanks.

--david
4 REPLIES
Todd Morrey
Occasional Visitor

Re: G3 DL380 - motherboard LEDs

To clarify for David (I am working on the same server)...

The LEDs in question are not documented at all in any of the server manuals that I could see.

I attached a map of the DL380 motherboard with the LEDs in question highlighted in red. There are two rows of 12? LEDs where we have the 5 amber ones showing. The rest are off.

We also have another DL380 G3 server (exact same hardware I believe) and none of these lights are on.

Anybody seen this before??
ernst limbrunner
Trusted Contributor

Re: G3 DL380 - motherboard LEDs

hi david

these leds seem to bee connected with the smart 5i. smart controllers also have a douzend of leds.

just watch the leds during post and then with disk activity.

for details see the attached dokument.

best regards
ernesto
Prashant (I am Back)
Honored Contributor

Re: G3 DL380 - motherboard LEDs

Hi ALL

Check Doccument it can help you

Regards,
Prashant S.
Nothing is impossible
Paul Young_3
Frequent Advisor

Re: G3 DL380 - motherboard LEDs

Hi David,

This may be a bit post event for you but we had issues with CR59, CR66 and CR67 and found them to be a jumper setting on the motherboard (no 3) being on when it should be set to off.

Just see the jumper settings on the inside of the server cover.

Cheers
why?