GPU, 10GB NIC and NVMe SSD in ProLiant DL360P Gen8?

[rmp5s]

I only have 4 bays in my server, so I was planning on sticking a PCIe NVMe SSD in one of the PCI slots. to use as a boot drive and for storage of media items that I'm working on before being moved off to the main storage. 

The other slot I was going to use for a 10GB fiber NIC. 

As far as I know, these things only have 2 PCI slots.

Well...I would really like to put a GPU in this thing to speed up video rendering.

Can you guys think of a way to get all this working?  

Thanks!!

[ronissac]

Hi ,

You may use the below riser cage for this purpose 

671352-001

PCI riser cage - T-shaped metal structure that mounts towards the rear of the server - Can horizontally mount one full height x16 PCIe card on one side and one low profile x8 PCIe card on the other 

you may install 2 x PCI device from this riser cage 

Regards 

Ronny

If you feel this was helpful please click the KUDOS! Thumbs below!

[ronissac]

Hello, 
Can you please help us to understand if you had any further queries.
This will help for everyone who are all following your forum.

Regards

Ronny