ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Gen 8 ilo 4 Remote console not displaying server Desktop

DarrylElwin
Occasional Visitor

Gen 8 ilo 4 Remote console not displaying server Desktop

Hi All

 

I have a Proliant ML 350p gen 8 server.  When using iLO and using the remote console, the remote console is only displaying a post screen, last line is PCI Auto Configuration Start as shown in the ILOSCREEN jpg attachment.

 

At this point the server is actually running windows Server and is being used. 

 

If you reboot the server, you can watch the server repost to the same point and stop in the same place.

 

This is the only GEN 8 server on this site so I'm not looking at the wrong server

 

iLO has been updated to version 1.51 Jun 16 2014

 

Any ideas any one?

 

1 REPLY
Jimmy Vance
HPE Pro

Re: Gen 8 ilo 4 Remote console not displaying server Desktop

Do you have an iLO Advanced License key installed?  The standard iLO will only give you a remote console through the POST process.




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!