HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Gen8 servers start up icons

 
Iruka
Occasional Advisor

Gen8 servers start up icons

Hi,

 

Just like to find out the following:

 

Gen8 servers will show some blue 'icons' located on the right of the screen being enabled by default during bootup. Some of these icons will include: Intelligent Provisioning, Power Regulator, Dymanic Power Capping, etc.

 

Can I say by default, only the 'Smart Array Advanced' and 'iLO Advanced' will be disabled?

They will be disabled until I purchase the smart array license and iLO Advanced license respectively?

 

Thanks

4 REPLIES

Re: Gen8 servers start up icons

 

 

You are correct in your understanding. Also, HP SmartMemory will be enabled only if all memory modules installed are that of HP's.

 

Regards,

 

Vijayasarathy

I work for HPE
Views expressed herein are my personal opinion and is not the views of HPE
To say thanks click the white "thumbs up" icon below!!!
Iruka
Occasional Advisor

Re: Gen8 servers start up icons

hi Vijay,

 

Is there any way that I enable the Smart Array Advanced or iLO Advanced other than getting the advanced license pack?

 

Thanks

byte007
Occasional Contributor

Re: Gen8 servers start up icons

I have found these icons are only "lit up" when you have the relevant hardware/software.

Jimmy Vance
HPE Pro

Re: Gen8 servers start up icons

Installing the license from the Advanced Pack enables these features. There is a trial license you can install to test iLO 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!