ProLiant Servers (ML,DL,SL)

Gen9 and NVME Enablement Kit

 
SOLVED
Go to solution
kira12
Frequent Advisor

Gen9 and NVME Enablement Kit

Hello all,

i use an DL380 Gen9 Server and try to use the NVME Enablement Kit with 6x SFF Disks. No Linux OS recognize the NVME Disk. All Firmware Updates are done.

Debian see the PLX Controller and load pciehp Kernelmodule but dont see the Disk.

I try to use Clear OS but this also dont see the Disk, how i can use it with Debian or other Linux OS?

best regards René

3 REPLIES 3
sudhirsingh
HPE Pro
Solution

Re: Gen9 and NVME Enablement Kit

Hi @kira12 

Please add following parameter to the kernel boot command line and check if the NVMe drives are discovered :

nvme_core.default_ps_max_latency_us=0


If you feel this was helpful please click the KUDOS! thumb below!

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo

kira12
Frequent Advisor

Re: Gen9 and NVME Enablement Kit

Hi,

thanks for the Informatiom, at the moment i try it with M$ OS and my disk are not recognize. I think the Disk is bad, i Ordered some new and try it again.

best regards ré

kira12
Frequent Advisor

Re: Gen9 and NVME Enablement Kit

Hello,

thanks for the helping Information, with the new Disk all OS recognize the Contoller/Disks.

best regards ré