HPE Community
ProLiant Servers (ML,DL,SL)
1753969 Members
7515 Online
108811 Solutions
New Discussion юеВ

Re: Getting Error After iLO Firmware Upgrade on GL380 G8

 
SOLVED
Go to solution
Giridar_SL
Advisor

тАО06-28-2021 05:26 AM

тАО06-28-2021 05:26 AM

Getting Error After iLO Firmware Upgrade on GL380 G8

Hi All, 

Getting below error on the diagnostics page after  upgrading the iLO firmware to 2.78 on GL380 G8

Controller firmware revision 2.07.00 Embedded media manager encountered SL_AbortHandler during init

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО06-28-2021 06:10 AM

тАО06-28-2021 06:10 AM

Solution

Re: Getting Error After iLO Firmware Upgrade on GL380 G8

check this

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00048622en_us


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
Giridar_SL
Advisor

тАО06-29-2021 05:43 AM

тАО06-29-2021 05:43 AM

Re: Getting Error After iLO Firmware Upgrade on GL380 G8

Thank you, resetting the NAND worked

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.