ProLiant Servers (ML,DL,SL)

Getting Error After iLO Firmware Upgrade on GL380 G8

 
SOLVED
Go to solution
Giridar_SL
Occasional Advisor

Getting Error After iLO Firmware Upgrade on GL380 G8

Hi All, 

Getting below error on the diagnostics page after  upgrading the iLO firmware to 2.78 on GL380 G8

Controller firmware revision 2.07.00 Embedded media manager encountered SL_AbortHandler during init

2 REPLIES 2
Torsten.
Acclaimed Contributor
Solution

Re: Getting Error After iLO Firmware Upgrade on GL380 G8

check this

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00048622en_us


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Giridar_SL
Occasional Advisor

Re: Getting Error After iLO Firmware Upgrade on GL380 G8

Thank you, resetting the NAND worked