ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Ghost 2003 and DL380G3

Ken Wold
Occasional Visitor

Ghost 2003 and DL380G3

I have a DL380G3 and I am trying to use Ghost2003 to make a back up. The problem is Ghost does not have a compatible DOS driver for the 10/100/1000 HP nic (NC7760).

I tried looking on HP's site for a packet or NDIS driver to no avail.
5 REPLIES
Stephen Grimmer
Trusted Contributor

Re: Ghost 2003 and DL380G3

I think its the Q57.dos driver...in sp24882.exe... At least that works for dos boot disk...

http://h18000.www1.hp.com/support/files/networking/nics/Compaq_NC7760_Gigabit_Ethernet_NICs_MSDOS.html
Ken Wold
Occasional Visitor

Re: Ghost 2003 and DL380G3

Sweet thx. I will give it a try.
Ken Wold
Occasional Visitor

Re: Ghost 2003 and DL380G3

I just opened that file you pointed me to. That file is just a Firmware upgrade for the NC7760 nic and not DOS drivers.

In order to get Ghost2003 to backup over a network, ghost needs the NDIS or packet driver for the NC7760 nic card.
Ken Wold
Occasional Visitor

Re: Ghost 2003 and DL380G3

Here is a list of files that SP23573 contains:

FWUPG BAT 592 06-26-03 12:14p
EE5702L2 35 8,192 06-25-03 11:30a
EE5703L2 33 8,192 06-25-03 11:39a
EE5701C2 19 8,192 06-25-03 2:11p
Q57PXE BIN 56,940 04-24-03 5:41p
Q57UDIAG EXE 226,059 06-19-03 2:45p
Run FWUPG.BAT from a command prompt.
Ken Wold
Occasional Visitor

Re: Ghost 2003 and DL380G3

Never mind. I am an idiot. I found the corret SP.