Ghosting DL360 G4

[David Fraser_1]

Hi I am trying to ghost an image from my DL360 g4 server

the software we are using is ghost 7.5 and we are using a dos boot disk

I am able to get a connection but the speed is terrible cant seem to get it above 30mb i have tried using the b57.dos driver and the q57.dos driver bot with no joy i have aslo tried setting the card to 100 full duplex and half duplex etc by using the settings within the protocal.ini file but nothing seemd to work

the card is a dual broadcom NC7782 on board

any help would be fantastic!!!!!!!!

[Prashant (I am Back)]

have you checked the same with cross cable also.

[Jon Ward]

What version of Q57.DOS are you using and could you display your PROTOCOL.INI file?

[Brian_Murdoch]

David,

Try Bart's Network Boot Disk. You can add support for the Broadcom Chipsets for HP Servers from the same link (B57.cab). Alternatively use this driver kit with your own method.

http://www.nu2.nu/bootdisk/network/

I hope this helps.

Brian