ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Ghosting Proliant 1600 to DAT

Martin_266
Occasional Contributor

Ghosting Proliant 1600 to DAT

Ghost 2003 doesn't see my tape drive. I used the HP solution SP10751:

A:\config.sys:
DEVICE = FWS2ASPI.SYS

When this executes on the boot floppy, the integrated SCSI controller and the attached SDT-9000 tape drive are reported as A-OK.

Inside Ghost, the tape is not listed as a possible destination.

TIA,

Martin