HPE Community
ProLiant Servers (ML,DL,SL)
1752812 Members
5981 Online
108789 Solutions
New Discussion юеВ

Re: Got an OLD ML350 G1 and need to underclock the 2nd CPU

 
Dan Fuhry
New Member

тАО06-12-2006 04:50 PM

тАО06-12-2006 04:50 PM

Got an OLD ML350 G1 and need to underclock the 2nd CPU

Hey guys,
I recently got an ancient (but still functional) Compaq ML350 server from a friend. When I got it, there was only one CPU in there and no terminator board in the second slot. In other words, the system wouldn't boot. So I bought a CPU on eBay and it arrived in great condition, however it's 66MHz faster than the other one and as a result won't work. Does anyone here know how to use motherboard jumpers to underclock the CPU, or if not how to mod the CPU so that it runs 66MHz slower?

Server specs:
Compaq ML350 G1
Intel Xeon 866MHz CPU, 256KB Cache
Intel Xeon 933MHz CPU, 256KB Cache <- in need of an underclock
896MB RAM
All the rest of the stuff from the original ML350

Thanks,
dandaman32
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО06-12-2006 04:58 PM

тАО06-12-2006 04:58 PM

Re: Got an OLD ML350 G1 and need to underclock the 2nd CPU

This won't work, CPUs have to be the same type.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Dan Fuhry
New Member

тАО06-12-2006 05:13 PM

тАО06-12-2006 05:13 PM

Re: Got an OLD ML350 G1 and need to underclock the 2nd CPU

Thanks Torsten.

Is there anyone who has a spare one of these that would be willing to trade?

-dandaman32
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.