HPE Community
ProLiant Servers (ML,DL,SL)
1752288 Members
3255 Online
108786 Solutions
New Discussion

Re: Growing an array on an ML530

 
Jon Arendt
Occasional Contributor

‎08-23-2005 06:36 AM

‎08-23-2005 06:36 AM

Growing an array on an ML530

I have an ML530 that is configured with 36GB hd's in a RAID 5 partition. Is it possible to replace those drives with 72GB drives and grow the partition?

This is in a Netware 5.1 environment.

Thanks.
0 Kudos
Reply
1 REPLY 1
Oleg Koroz
Honored Contributor

‎08-23-2005 05:46 PM

‎08-23-2005 05:46 PM

Re: Growing an array on an ML530

Shouldn't be a problem,
From HW side you will upgrade one Drive at Time, than from SW CPQONLIN should allow you to Extend. (You can't use Smart Start CD for that, only Online)
If you never done in the past - additional Consultation for all Prerequisite would be necessary with tech Support
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.