HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Growing an array on an ML530

 
Jon Arendt
Occasional Contributor

Growing an array on an ML530

I have an ML530 that is configured with 36GB hd's in a RAID 5 partition. Is it possible to replace those drives with 72GB drives and grow the partition?

This is in a Netware 5.1 environment.

Thanks.
1 REPLY
Oleg Koroz
Honored Contributor

Re: Growing an array on an ML530

Shouldn't be a problem,
From HW side you will upgrade one Drive at Time, than from SW CPQONLIN should allow you to Extend. (You can't use Smart Start CD for that, only Online)
If you never done in the past - additional Consultation for all Prerequisite would be necessary with tech Support