cancel
Showing results for 
Search instead for 
Did you mean: 

HAL

Ayman Altounji
Valued Contributor

HAL

The HAL that the server is currently using is the MPS Multiprocessor - is there any advantage to using the APIC HAL instead. Also is there a difference in setting the APIC mode from "Full Table" as it is now to "Full Table - Mapped"?

Thanks
Tom Parham
1 REPLY
Mark Cloutier
Respected Contributor

Re: HAL

MPS multiprocessor and APIC HAL pretty much do the same thing UNLESS you are upgrading from a single proc to a dual which you arent..if it is working fine dont worry about it..
as for the apic mode yes...full table is the setting for multiprocessors..full table mapped is for single..
We are here for a good time, not a long time!