HDD error

[Fdpeshnik]

HI
Server HP160 G 6

- -
Smart Array P410
It can not be recovered RAID an array
HDD the Western Digital at disk testing writes an error:
----------------------
Physical Hard Drive 1, Controller Slot 0 - Sequential Read Test CISS driver reported problem
ATA GB1000EAMYC, CISS0: Target Status Check Condition: Medium Error: UNRECOVERED READ ERROR SCSI CDB = [ 28 00 00 00 00 00 00 00 08 00 ] Sense Data = [ f0 00 03 00 00 00 00 0c 00 00 00 00 11 00 00 00 00 00 ] , Ran on CPU 0 1 000000
Physical Hard Drive 1, Controller Slot 0 - Random Read Test CISS driver reported problem
ATA GB1000EAMYC, CISS0: Target Status Check Condition: Medium Error: UNRECOVERED READ ERROR SCSI CDB = [ 28 00 58 7c 83 f9 00 00 08 00 ] Sense Data = [ f0 00 03 58 7c 83 f9 0c 58 00 00 00 11 00 00 00 00 00 ] , Ran on CPU 0 1 000000

[Johan Guldmyr]

Hey,

so you have a disk with unrecovered read errors.

Has it been replaced?
Have you replaced any other disks?

[Fdpeshnik]

there is no replacement at this time.
the disk is under warranty.
Is it a warranty case?

[Johan Guldmyr]

Probably yes.
You can run the array configuration utility (ACU) and array diagnostic utility (ADU) on the server, that will probably give you some more information about the disk.

You can also test the disks in HP online diagnostics.

[Michael A. McKenney]

If under warranty, Call HP and get a new one shipped out. Make sure to run the firmware on all drives so they match.

[Daniel Browder Raj]

Hi,

you just replace the disk . and check the disk has latest firmware .