cancel
Showing results for 
Search instead for 
Did you mean: 

HDD error

 
Fdpeshnik
Occasional Visitor

HDD error

HI
Server HP160 G 6

- -
Smart Array P410
It can not be recovered RAID an array
HDD the Western Digital at disk testing writes an error:
----------------------
Physical Hard Drive 1, Controller Slot 0 - Sequential Read Test CISS driver reported problem
ATA GB1000EAMYC, CISS0: Target Status Check Condition: Medium Error: UNRECOVERED READ ERROR SCSI CDB = [ 28 00 00 00 00 00 00 00 08 00 ] Sense Data = [ f0 00 03 00 00 00 00 0c 00 00 00 00 11 00 00 00 00 00 ] , Ran on CPU 0 1 000000
Physical Hard Drive 1, Controller Slot 0 - Random Read Test CISS driver reported problem
ATA GB1000EAMYC, CISS0: Target Status Check Condition: Medium Error: UNRECOVERED READ ERROR SCSI CDB = [ 28 00 58 7c 83 f9 00 00 08 00 ] Sense Data = [ f0 00 03 58 7c 83 f9 0c 58 00 00 00 11 00 00 00 00 00 ] , Ran on CPU 0 1 000000
5 REPLIES
Johan Guldmyr
Honored Contributor

Re: HDD error

Hey,

so you have a disk with unrecovered read errors.

Has it been replaced?
Have you replaced any other disks?
Fdpeshnik
Occasional Visitor

Re: HDD error

there is no replacement at this time.
the disk is under warranty.
Is it a warranty case?
Johan Guldmyr
Honored Contributor

Re: HDD error

Probably yes.
You can run the array configuration utility (ACU) and array diagnostic utility (ADU) on the server, that will probably give you some more information about the disk.

You can also test the disks in HP online diagnostics.
Michael A. McKenney
Respected Contributor

Re: HDD error

If under warranty, Call HP and get a new one shipped out. Make sure to run the firmware on all drives so they match.

Re: HDD error

Hi,

you just replace the disk . and check the disk has latest firmware .
Work Hard With Faith