ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 410 controller not seen by OS

 
SOLVED
Go to solution
Allen Huang_1
Frequent Advisor

HP 410 controller not seen by OS

We purchased a HP410 with 512 cache along with the drives. The BIOS configuration for the new drives went as expected and I configured at as RAID5. The OS found the device, but it is Unknown and therefore does not see the drives. Drivers are not posted on HP website so I am stuck. The system is running RH4.6. Please advise.

Lspci shows:

1f:00.0 RAID bus controller: Hewlett-Packard Company: Unknown device 323a (rev 01)
3 REPLIES
Johan Guldmyr
Honored Contributor

Re: HP 410 controller not seen by OS

Have you installed drivers for the device?
Jimmy Vance
HPE Pro
Solution

Re: HP 410 controller not seen by OS

what version of the cciss driver is on your system? CCISS Version: 2.6.20-16 (A) was the first version to support the 410 controller.

The latest version of the cciss driver is here

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3883931〈=en&cc=us&prodTypeId=329290&prodSeriesId=3883890&taskId=135




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Allen Huang_1
Frequent Advisor

Re: HP 410 controller not seen by OS

I've been looking for the drivers. Thank you for pointing me to the right place.