HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP ACU - No controllers detected (DL380 Gen9)?

 
SOLVED
Go to solution
wroot
Occasional Advisor

HP ACU - No controllers detected (DL380 Gen9)?

I have DL380 Gen9 installed via Provisioning with Windows Server 2012. The RAID array has been created during provisioning. I have also downloaded the latest HP ACU (9.40.12.0) and installed it. But it can't detect controllers (controller is P840).

We have another server (DL380 G8) with Windows Server 2012 and P420I controller. HP ACU detects it. Is P840 not supported by ACU or should i use some other tool to access RAID configuration?

4 REPLIES
Jimmy Vance
HPE Pro
Solution

Re: HP ACU - No controllers detected (DL380 Gen9)?

ACU has been replaced by HP SSA. From Intelligent Provisioning run HP SSA, or from RBSU, select setup and the disk controller and launch HP SSA




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
wroot
Occasional Advisor

Re: HP ACU - No controllers detected (DL380 Gen9)?

Thanks. HPE SSA works fine.

NFL
Occasional Visitor

Re: HP ACU - No controllers detected (DL380 Gen9)?

Sir,

Is it possbile to manage from windows GUI, or do we need to reboot and login to inteligent provisioning? 

Jimmy Vance
HPE Pro

Re: HP ACU - No controllers detected (DL380 Gen9)?

You can load SSA in Windows and run from the OS




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!