ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Automatic Restart, server 2003 DL380

frank muise
Occasional Advisor

HP Automatic Restart, server 2003 DL380

Does this have any automatic restart features besides the one included in Windows.

The server keeps restarting, and I am finding a STOP error in the event viewer, but no blue screen is coming up.

System Failuer: Stop Error 0x805000f
Event ID: 1076
4 REPLIES
Clint Bowers
Occasional Visitor

Re: HP Automatic Restart, server 2003 DL380

You might try this hotfix.
http://support.microsoft.com/kb/937455
It may help you.
cnb
Honored Contributor

Re: HP Automatic Restart, server 2003 DL380

Hi Frank,

Depending upon the specific Proliant DL380 Generation series (G2, G5, etc..), it has Automatic Server Recovery (ASR) in BIOS, which can be configured.

See this document:

http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01158873〈=en&cc=us&taskId=101&prodSeriesId=316529&prodTypeId=15351

You'll need to know your specific Proliant Gx model and then check the BIOS version to see if any updates or advisories have been posted.

Also see the Proliant Troublshooting Guide:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00300504/c00300504.pdf

Hope this helps.

Rgds,



cnb
Honored Contributor

Re: HP Automatic Restart, server 2003 DL380

Hi Frank,

DL380 Generation 1 Drivers and Firmware for W2003:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=342841&prodTypeId=15351&prodSeriesId=254889&swLang=8&taskId=135&swEnvOID=1005

If you have something other than the first generation then these won't work for your system. Just locate the correct server series here:

http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc=us&taskId=135&prodTypeId=15351&prodCatId=241435

Rgds,


cnb
Honored Contributor

Re: HP Automatic Restart, server 2003 DL380

Hi Frank,

Disable ASR and then look at the logs. If it won't stay up, then use iLO to look at the IML logs. iLO will function without the server being booted. These are NVRAM hardware logs.


Best Regards,

-cnb