ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP C3000 Power Supply problem

 
Highlighted
Occasional Collector

HP C3000 Power Supply problem

Hello gentlemen and ladies. HP in debug reports this to me. In the GUI itself everything is ok, the logs are clean. What could this mean? It goes on like this all the time.

Jan 27 20:06:41 OA: Input power supply type has been determined as AC power supply

Jan 27 20:06:52 OA: FRU header read failed:usei2c=1h off=0h sz=8 (slotOrBus=30 sa=A8h)

Jan 27 20:07:01 OA: Input power supply type has been determined as AC power supply

1 REPLY 1
HPE Pro

Re: HP C3000 Power Supply problem

Hi 

i2c is the communication bus and the errors seem to indicate that there is data that cannot be read from the power supplies. 

These event usually you will find in OA debug log which is used by HPE support team for troubleshooting purpose.

For any hardware issue you can refer OA syslog.

 

I am an HPE Employee

Accept or Kudo