HP CN1100e converged network adapter change its personality from FCoE to ISCSI after each reboot

[HALOUANE-35]

Hi,

We've followed the procedure described on the HPE manual for activating the FCoE on the HP CN1100e dual port converged network adapter:

1) Change the adapter personality on the UEFI System Setting;

2) Install the HPE Storage Fibre Channel Over Ethernet Adapter Kit for the x64 Emulex Storport Driver;

3) reboot the OS (Windows Server 2012 R2).

After the reboot, the adapter personality is changed back to ISCSI knowing that before installing the driver I could see the adapter personality as FCoE. Even when I don't install the driver and I reboot, the same thing happens and the adapter loses its FCoE personality. The server is an HPE Proliant DL380 G9