ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP DL 380 G4 no VGA help

mkaddoura
Occasional Contributor

HP DL 380 G4 no VGA help

Hello all,

  i have a HP Server DL 380G4, the environment power suddenly went out... when the power comes back, the server turn on but no more VIDEO on the monitor, no more beeps but fans and HDD are working and blinking Green

 

what can causes this problem and how i can fix it please?

 

Thanks in advance

3 REPLIES
PGTRI
Honored Contributor

Re: HP DL 380 G4 no VGA help

hi,

 

You can try following:

 

clear NVRAM

reseat the riser cage

run the server with minimal configuration

 

 

Thanks

 

regards,

 

How to Say Thank You? Just click the KUDOS!
mkaddoura
Occasional Contributor

Re: HP DL 380 G4 no VGA help

Hey , Thanks

i am gonna reseat the RAM, and riser Cage and send Feedback
but how i can "Clear NVRAM" and does this affect on the "RAID" or on the Data of the HDD's ?

Thanks alot
highly appreciated
mkaddoura
Occasional Contributor

Re: HP DL 380 G4 no VGA help

Clear NVRAM:
1. Power down the server.
2. Remove the server cover.
3. Locate the System Maintenance Switch, position 6, and move the switch to the "On=Clear NVRAM" position.
4. Power the server back on until Power-On Self-Test begins.
5. After POST has started, power-cycle the server off.
6. Move the System Maintenance Switch back to the "Off" position.
7. Replace the server cover and power on the system. The server will boot normally.