ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP DL 380 G8 V2 - SATA HDD 4 TB kompatibility

 
Highlighted
Occasional Contributor

HP DL 380 G8 V2 - SATA HDD 4 TB kompatibility

Hi all,

by rebuld new arrays on SmartArray 420 there are 2 x SAS 1 TB  (Raid 1), 2 x SATA 2 TB (Raid 1) and 3 x SATA 4 TB (2,5 Zoll Seagate Barracuda - Raid 5) there are permanent problems. The build is nearby complete finished and than a HDD light switched to orange and the other two HDD lights (for do not remove ...) switched on. 1. time it's allways the same new HDD. I ordered a new one, and the the next HDD light switches to orange ... The error says Failure HDD is not accessable.

Both 1 TB and 2 TB Raid 1 works allway fine.

Is there a known compatibility problem with Seagate Barracude 2,5 Zoll 4 TB, or 4 TB SATA?

 

 

2 REPLIES 2
Highlighted
Occasional Visitor

Re: HP DL 380 G8 V2 - SATA HDD 4 TB kompatibility

Hi, 

 

Share the Serial Number and Model Number/Part Number of the drive so that we can look this up for you. 

Also, check with Seagate regarding the same in the meantime. 

 

Thank you

HPE Employee. 

Highlighted
Occasional Contributor

Re: HP DL 380 G8 V2 - SATA HDD 4 TB kompatibility

Thanks for answer. There are 4 drives from the same type. All has the same problem. The first one is like below:

Type: ST4000LM024

PN: 2AN17V-566

FW: 0001

SN: Confidential info erased

I will check the same at Seagate.