HP DL120 gen9 freeze on boot witch error 270 iLO FW

[Praxis-Lor]

I have a similar Problem with my Pro Liant ML150 Gen9 Server like in the above mentioned case.

My BIOS is from 2014 , I turned the server off yesterday  and wanted to reboot today. 
Same error in the boot sequence as discribed above. 
Unfortunately I dont have the PCI riser installed so I cannot turn it off to solve the problem and get into the boot menue. 
I would be glad about any help today.

[support_s]

System recommended content:

1. Advisory: HP ProLiant Gen9 Servers: HP Integrated Lights-Out 4 - Server May Halt During POST with a "270 - iLO FW Communication Issue" Error After Viewing the IML Using the UEFI System Utilities Menu (F9 Key) and Rebooting the Server Under Windows Server

2. Advisory: HPE Integrated Lights-Out 5 (iLO 5) - "POST Error: 329 - Power Management Controller FW Error - Unable To Communicate with the FW" And Error: 270 Occurs on HPE ProLiant DL325 or DL385 Gen10 Plus Servers, iLO 5 v2.11 (Or Earlier), and NVMedrive

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Suman_1978]

Hi,

Does the server boot to the operating system?
If YES, can you try updating the iLO Firmware?
Also follow this article.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

[Praxis-Lor]

No unfortunately not. 

It stucks during bios booting. Second screen after it counts to 100 percent where i can select boot menue etc.

For example - I select boot menue but I can't get there cause server booting stucks.

Error 270: Recommedation is to uodate iLO and Bios but thats not possible. I can't open iLO Web Gui and can't boot from USB because the problem I mentioned above

Any tricks?

[Suman_1978]

Hi,

Tricks??

You may try to Clear NVRAM from the System Board maintenance switch.
You may also refer to this guide, page# 94.

Thank You!
I work with HPE but opinions expressed here are mine.
Recent Support Video Releases

[Suman_1978]

Hello @Praxis-Lor 

Let me know if you were able to resolve the issue.

If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

Thankyou
Suman