HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP DL360 G4 does not power on.

 
Lee Clements
Occasional Advisor

HP DL360 G4 does not power on.

I just aquired a used DL360 G4.

I was running some tests on it today, and to my surprise, it shut itself off while I was at work and I was no longer able to contact the iLO interface.

When I removed the access panel, I recognized that all of my system board lights were green, however I could not get any activity out of my iLO interface and the server power button itself did absolutley nothing.

I removed the battery, replaced it, but no avail.

Any thoughts?

Thanks!
3 REPLIES
YAQUB_1
Respected Contributor

Re: HP DL360 G4 does not power on.

Hi,

Can U try to unplug ur both power supply (properly system shutdown) and re-plug again.

Now check what status is?

BR/
Yaqub
Lee Clements
Occasional Advisor

Re: HP DL360 G4 does not power on.

Yes, I have already removed both power supplies and switched their posistions in the server.

I also reseated the fan assembly, the power distrubution unit, both hard drives, both processors, all RAM, etc.
YAQUB_1
Respected Contributor

Re: HP DL360 G4 does not power on.

Hi,

I suspect Ur system iLO port fualty.

Try to replace the System Board (Motherboard) & then see what is status?

BR/
Yaqub