ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP DL360 G4p SATA or SATA II

 
SOLVED
Go to solution
Dawid Chrzan
Occasional Contributor

HP DL360 G4p SATA or SATA II

Hi,
i am wondering if HP DL360 G4p will work using SATA II disks .
Have anyone tried ?

Best Regards
Dawid "Kuba" Chrzan
2 REPLIES

Re: HP DL360 G4p SATA or SATA II


Hi Dawid,

HP DL360 G4p not supported SATA 2

Check the below link.
http://h18004.www1.hp.com/products/quickspecs/12166_div/12166_div.HTML

Regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
TTr
Honored Contributor
Solution

Re: HP DL360 G4p SATA or SATA II

The SATA controller on the DL360 G4p is a SATA 1.0 (1.5Gb) controller as correctly mentioned above. However if you have SATA 2.0 drives most likely they will work. The SATA 2.0 drives are expected to be backwards compatible and will sync up with SATA 1.0 controllers.

SATA 1.0, SATA 2.0 are the prefered terms although most people (including myself) use SATA I and SATA II instead.