ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP DL360 G7 - Need Help/Advice with Sensors Failure

 
injurer
Occasional Visitor

HP DL360 G7 - Need Help/Advice with Sensors Failure

Hi. I bought two old DL360 G7 servers. Those machines while rather old are doing pretty good job for my home lab.

Recently I got issues with one of those after moving it from one location to another. The server cannot boot indicating "overheat". I don't believe it had any chance to get any heat. Not to mention the room temperature was about 15C. The server is trying to start for probably less than a second. iLO actually shows all the sensors as 0C. I was able to boot it somehow but then I made another "move" of the server and it failed again. 

All this makes me to think something is wrong with either the temperature sensors or some connector. Any ideas what should I look for?

1 REPLY 1
Suvamay
HPE Pro

Re: HP DL360 G7 - Need Help/Advice with Sensors Failure

Hello 

This should be some issue with temperature sensor.  Please check IML. Check with minimum hardware configuration.

If the issue remains unresolved, then log a support ticket with HPE.

Thanks,


Accept or Kudo