HP DL360 Gen10 Changed security setting from Production to FIPS

[Sathish87]

Hi Team,

HP DL360 Gen10 Change security setting from Production to FIPS , Post that security setting production option is not listed we are unable to revert back to production state? 

Why we need to bring ILO security status to production mode due to Intelligent provisioning update is not supported in FIPS/High Security Mode.

Advisory: HPE Gen10 Systems- HPE Intelligent Provisioning Is Not Supported in Higher Security Modes on Gen10 Systems: https://support.hpe.com/hpesc/public/docDisplay?docId=a00073574en_us&docLocale=en_US

RESOLUTION

Higher security mode functionality is not supported in Intelligent Provisioning, and will not be supported through the lifespan of HPE Gen10 products.

If Intelligent Provisioning is needed, reset the security mode to "production."

Kindly let us know if any procedure available to bring system back to production mode.

Thanks and Regards,

S Sathish

[support_s]

System recommended content:

1. HPE Integrated Lights Out (iLO 5) for Gen10 Servers - iLO Security States

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[Moderator edit: Removed the broken link. Please refer to https://support.hpe.com/]

[Sathish87]

Hi Team,

For Disable FIPS if we perform to reset ILO to factory default setting with below given procedure. In that case our application required downtime entire system need to be reset.

https://techlibrary.hpe.com/docs/iss/proliant-gen10-uefi/s_reset_ilo_defaults.html

can you let us know procedure to downgrade FIPS to production mode , without affecting application running on the system.

Thanks and Regards,

S Sathish

[support_s]

Hi, 

You cannot  change from FIPS to Production without ILO reset. 

Please find the below document for the same. 

https://internal.support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00026113en_us

You need a server reboot to reset the iLO to factory defaults and configure. 

[Moderator edit: Removed the broken link.]

[DannyArcher]

This document is not available or access to this document link may require authorization: