HP DL380 reboots daily, without warning.

[sandeep_raman]

The last NMI entry was on

NMI
Severity Failed
Count 1
initialUpdate 9/13/2006 23:56
lastUpdate 9/13/2006 23:56

Check if the server ASR's today,if it does'nt it was a false trap.
If it does,call HP for replacement.

Everything else seems ok.

SRH

[Ruben Sønderup]

Yep, last ASR is from today. all I like to know i which part should be replaced.

[sandeep_raman]

Mostly its memory.

SRH

[Ruben Sønderup]

Thanks, I will order the service partner to replace RAM.

Regrards

Ruben

[emosteve]

We had a problem with a dl380 g3 rebooting randomly. It was caused by the power injector.

It is a single point of failure even if you have dual power supplies.

[chongkan]

Hi,

0- Check memory configuration on RBSU and that your OS version supports it..

1- Get compatible memory from another compatible server and swap it on sets, test both servers and identify a failing dim or set.

2- If no failing dims are identifies, proceed in the same way with CPUs.

3- If no failing CPUs are identified, replace the System Board.

Microsoft Link:

http://support.microsoft.com/kb/101272/en-us

[FH_1]

Hi Ruben,

Is your server working ok now? What did you end up doing to resolve the problem? I have the same server model with very similar problems. Thanks.

FH

[Ruben Sønderup]

No, I did not solve the problem, the service partner, comes on a regular basis and replace some part. to bad.