HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP DL580 Server G2 - Parity Check 2 - System DIMM Memory

 
shaban
Occasional Visitor

HP DL580 Server G2 - Parity Check 2 - System DIMM Memory

Hi,

HP DL580 Server G2
RAM: 10GB (4*2GB)+ (4*512MB)
CPU: 4*2.5GHz
HHD: 72GB

I have bought this server from eBay a week ago the seller said it was working fine, but for some reason I keep getting this error Parity Check 2 - System DIMM Memory

I have tried to change the RAM slots but don't work.

**Server Detected 10246MB of RAM Installed.

I removed the 4*2GB of RAM, worked fine. but why is it not taking the full 10GB RAM.

forgot to say 4*2GB is Bank B(Amber LED Light) and 4*512MB Install in bank B (Green LED light).



I have Upload a video to YouTube:
http://www.youtube.com/watch?v=IU8__D-fHVI


Created an album on photobucket with 11 images
http://s1118.photobucket.com/albums/k616/drkossa/



Any Advise will be really helpful
1 REPLY
Michael A. McKenney
Respected Contributor

Re: HP DL580 Server G2 - Parity Check 2 - System DIMM Memory

200 MHz Double Data Rate (DDR) SDRAM (PC1600 Registered SDRAM Memory with Advanced ECC functionality)

What are the part numbers of the RAM? I would check each set of RAM separate. Download memtest86 and test each group of four sticks separately. Verify they are PC1600 Registered ECC.

If Amber on 2GB, verify the ram. What are the part numbers? HP Servers are very picky on RAM. You can use HP or Axiom.