ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

HP DL585 G7 server not booting, Amber power LED solid. Power supplies OK.

msray
Occasional Visitor

HP DL585 G7 server not booting, Amber power LED solid. Power supplies OK.

Four of our DL585 G7 servers will not power on.

Power light is solid amber.

    The Health LEDs statuses are unknown at the moment, sorry.

Power supplies are all good.

iLO is accessible, but...

   1.)  How to pull the IML if the server will not power on?

   2.)  one note I have is:  "Two Servers do not show any hardware issues

          under the iLO 3 menus other than the servers are in a standby state

          and will not turned on..."

Mother board LED codes flash between '00' and '08'

   3.)  where are these motherboard LED codes defined?

Spares for swapping components are not available.

   4.)  If the problem is a Power Supply Backplane module,

         - can the motherboard still have power for iLO and the LED codes above?

For the server that has an unknown iLO password, can it be defaulted/reset by removing the SPI board battery and shorting out the leads like you can do for RBSU (ROM)

One server iLO does not respond at all.

Any ideas anyone?

1 REPLY
Mike Texter
Regular Advisor

Re: HP DL585 G7 server not booting, Amber power LED solid. Power supplies OK.

I'm having the same problems too, haven't found any solution yet.